Skull Leopard Print Distressed 16oz Cup Wrap
Listing is for a ready to apply transfer for 16 ounce glass beer can/Libby style cups. Print only, ready to apply. Cups and transfer tape not included.
Please note that not all brands of 16 oz. glass cups have the exact same circumference measurements. They may differ by a few .10th" in height and circumference. Trimming may be necessary. We can print to your size, using the custom print listing, if you need a specific size for your cups.
Default print size: 9.75” wide, 4-5” tall (height of some designs varies but none are over 5” tall)
Eco solvent- printed with eco solvent waterproof ink on thin clear adhesive film, contour cut close to the design shapes. Weed excess media from around the cut shapes before applying. Apply with low tack transfer paper, not included. After applying transfer smooth all areas firmly pressing to the surface and push out any bubbles to the closest edge before peeling transfer tape. No heat/cup press needed. Does not have to be sublimation coated, adheres to glass metal plastic and other hard substrates
UV DTF - printed with UV cured waterproof inks directly onto adhesive, no excess media to weed. Transfer film is included and already applied. Peel cover sheet off, apply transfer, firmly press all printed areas onto the surface, push any bubbles out to the closest edge. Peel transfer film at up to 180 degrees to remove, leaving the transfer on the glass. No heat/cup press needed. Does not have to be sublimation coated, adheres to glass metal plastic and other hard substrates
Sublimation - Place and tape transfer with Teflon/heat transfer tape. Use a cup press and the instructions for your glass for heat and time to apply transfer. Must apply on specifically sublimation coated cups/materials. No transfer tape needed. Remove transfer paper after cooled.
After print care: Hand wash, no dishwasher, is recommended for best life of all decorated cups.